Results 1 to 4 of 4

Thread: Seawind 1000xl control cables length

  1. #1
    Join Date
    Feb 2009
    Location
    Boca Raton, FL
    Posts
    2

    Default Seawind 1000xl control cables length

    Anyone know the length of the teleflex shift and throttle cables on a 2009 1000XL? Camira has a broken starboard side shifter cable and that one is labeled CC33007 so is 7 feet, but the seawind factory installed the rest of them so that the label is obscured inside the control console and I don't want to commit to replacing all the cables until they are ordered, delivered, and ready to install as I've temporarily repaired the broken cable (failed at the swivel tube crimp joint). I've estimated 18 feet for the two port cables and 7 feet for each of the starboard side cables but sure would like confirmation! Thanks for any help.

  2. #2
    Join Date
    Aug 2009
    Location
    Stratford upon Avon
    Posts
    3,394

    Default Re: Seawind 1000xl control cables length

    Hello and welcome. Sorry to hear you have got problems. Just wait a few minutes and Ozmultis will be along with all the information - I hope!

    Mike
    Nothing works on an old boat, except the skipper.

  3. #3
    Join Date
    Oct 2008
    Location
    Brisbane Australia
    Posts
    1,154

    Default Re: Seawind 1000xl control cables length

    7 foot and 17 foot. Doesn't matter if you go a bit longer.

  4. #4
    Join Date
    Feb 2009
    Location
    Boca Raton, FL
    Posts
    2

    Default Re: Seawind 1000xl control cables length

    Thanks for the info, Andrew (and Mike for the welcome). Now I can get them ordered and the real fun can begin!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •