Results 1 to 4 of 4

Thread: Gasket Seals For Locker Lids

  1. #1
    Join Date
    Aug 2009
    Location
    Southern Chesapeake
    Posts
    190

    Default Gasket Seals For Locker Lids

    Sometime in the near future, I should replace these rubber seals.

    Has anyone found a source in the US for something suitable?

  2. #2
    Join Date
    Nov 2008
    Location
    Santa Barbara, Calif.
    Posts
    539

    Default Re: Gasket Seals For Locker Lids

    I use Mcmaster-Carr for that sort of thing (and lots of others).

    http://www.mcmaster.com/#standard-rubber-sheets/=sn2g1y

  3. #3
    Join Date
    Aug 2009
    Location
    Southern Chesapeake
    Posts
    190

    Default Re: Gasket Seals For Locker Lids

    Thanks. I will look there. But at first blush, it looks like they may have only rubber and foam stock, and I need (or want) a molded product like what is on the lid frame now. It wraps around the edge of the frame.

    I posted the question under the Voyage Owners Forum hoping someone with a Voyage Catamaran had located a product here in the US that is close enough to what the factory installed.

    I should have made this clear in my original post.

    Metro Molded Rubber https://www.metrommp.com/?f=part_type_list has a lot of molded sections that I can compare.

    Quote Originally Posted by mikereed100 View Post
    I use Mcmaster-Carr for that sort of thing (and lots of others).

    http://www.mcmaster.com/#standard-rubber-sheets/=sn2g1y

  4. #4
    Join Date
    Aug 2009
    Location
    Southern Chesapeake
    Posts
    190

    Default Re: Gasket Seals For Locker Lids

    I see that McMaster does have some foam seals, but I'm not sure they will fit too well. I'll look closer.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •